Tire Inspection Sub Statuses

New Tire Inspection Sub Statuses:

Instructions:

To use sub-statuses in Autoflow's Multi Axle Tire Inspection, follow this guide.

Step 1:  Goto DVI Sheet Setup and click the Tire Inspection edit button.

Step 2:  Click Add Status

Step 3:  Click a symbol for red, yellow, green

Step 4:  Add a number indicating depth

Step 5:  Add a note to describe what that measurement is and means for the customer.

TIP:  Add all your statuses first.  Then add all the depth numbers (two digits only).  THEN put all your notes in.  
Good news:  This is a one time setup, the Tire Inspection is ready to go for any sheet you toggle it on for!

07/32 - Tread life is good

06/32 - Tread life is good

   

05/32 - Tread depth is nearing end of usable life

04/32 - Tread depth is nearing end of usable life

03/32 - Tread is below recommended depth for safety

02/32 - Tread depth is far below safe range.

01/32 - Tread depth is nearly completely spent.  Unsafe.

00/32 - No tread remains.  Excessive wear.  Unsafe.

• Related Articles

• Protractor Inspection Package Mapping for DVI Sheets

  In order to map your saved Protractor inspections over to an Autoflow DVI, follow the steps listed below: 1. Create or locate the Protractor Inspection you would like to map to Autoflow. Double-click into the inspection if you are using one that has ...

• Protractor - Configuring Inspection Results For DVI Insert

  This process must be done while logged into Protractor as an admin level account In Protractor select the Settings from the primary Home menu Navigate to the Inspection Results category, easily found by searching for 'Inspection' The Code and Labels ...

• Automatic previous inspection notes and accessing them from a different DVI sheet.

  This is a great feature that we have, the ability to populate a customers prior DVI history on a return visit. With that being said, we do not have the ability to sync between sheets. Although these DVI sheets can't share data between them, that ...

• Red statuses in the workflow swim-lane

  Sometimes you may run across a status in your workflow thats red or orange. It means that the countdown timer that was selected under that workflow step is 10 minutes (orange) from expiring. Red is expired. In this example, service was given a limit ...

• DVI Repopulation

  One of the great things about our DVI's is the capability of repopulating data from a previous inspection. If you have a customer that comes in regularly, being able to repopulate data from a previous inspection can help save time and effort when ...